닫기

Art INJECTOR

An injector dedicated to mesotherapy, the solution
is directly inserted into the skin layer,
with the anticipation of good results.

Characteristics

  • Simple setting and use
  • Less pain
  • Wireless and portable
  • Control of drug dosage
  • Solution (ampoule) loss minimized
  • Outstanding durability

Spec.

  • Model Name : Art Injector
  • Battery : Lithium-polymer 500mAh
  • Country of manufacture : Republic of Korea
  • Dose volume : 0.01cc/0.02cc/0.03cc
  • Purpose of use : Absorbing solution
  • Syringe : 1cc/3cc
  • Weight of product : Original product (220g)
  • Size of product : Original product (35mm X 88mm X 264mm)
  • Total time of use : Continuous use (Maximum 6 hours) / Recharging time (Maximum 3 hours)

SYNA M

It uses powerful air-pressure energy and through
a specially-designed nozzle, the substance is inserted deep inside the skin in the air-pressure needle-free injector.

Characteristics

  • Injector without a needle
  • Medical substances are sprayed evenly
  • Non-surgical, non-invasive treatment without any rejection of needles
  • Minimal loss of blood, bruises or skin reactions, leading to quick recovery
  • Eliminates the danger of cross-contamination
  • Facial and body various procedures are possible.
    - Face: Thin skin, under eyes, and overall face care.
    - Body: Slimming care possible (Abdomen, forearms, thighs, etc.)
  • Levels can be adjusted according to the treatment area (Level 1~8).

Treatment area of SYNA M

  • Face care - whitening, lifting and acne care
  • Shoulder
  • Wrist
  • Elbow
  • Waist

Components

  • Hard case where power controller is fitted
  • Injector 1
  • 5 needle caps
  • 5 syringes
  • Instruction manual

Spec.

  • Model Name : SSM-2000
  • Main function : Air-injection system
  • Power Supply : 110 ~ 230V, 60Hz
  • Electric energy consumption : 30W
  • Output level : 1 ~ 8
  • Size 450*300*100mm
  • Weight : 5kg

Skinp

Stamp-type automatic MTS beauty device

Increase the penetration of active ingredients by perforating with micro pins or stimulating the scalp and skin.
It uses an LED light source to bring the vitality into the skin by a stamp-type automatic MTS beauty device for skin and scalp.

Characteristics

  • Convertible needle tab type where different kinds of ampoules can be combined
  • Polymer(Non-metallic) material with little irritation
  • By adjusting the cartridge and needle guide, the function of controlling the discharge amount of the ampoule is possible
  • With MTS function, The active ingredients are directly delivered
  • Micro pin stimulates the skin and helps circulate the blood

Components

  • skinp body
  • Recharging cradle
  • Micro needle 6EA (Polymer, 0.25mm)
  • USB cable
  • Massage tab 2EA
  • Instruction manual
  • Cartridge 2EA
Method of use
  • Get rid of sealing of the ampoule.

  • Place the ampoule on a flat surface
    and press the needle protecting cap with the palm of the hand and press until combined.

  • Place the cartridge on a flat surface, and press with the palm of the hand the needle protecting cap combined with the ampoule bottle until combined.

  • Fit the cartridge combined with the ampoule into the body. Press the power switch for 2 seconds, turning on the device, and through the speed control button, use at the desired level.

Spec.

  • Model name : MTSAN - 9000
  • Level control : 3 leves
  • Power : 내Built - in lithium polymer 3.7V 1200mAh
  • Power / Voltage : AC100 ~ 240 / 50 ~ 60Hz
  • Usage time : If fully charged up to 20 times (10 minutes per time)
  • Charging type : standard micro USB (+5V)
  • Size : Ø45 x 210 (Main body)
  • Weight(main body) :160g